Product details

1 >. Structure

It consists of the roof, floor and 4 main pillars. The corners are fixed between the floor and the roof with bolts that can be disassembled for strength. Walls, doors and windows are installed with a built-in locking slide rail system that can be adjusted to the desired position.

2 >. Wall

It is insulated by the exterior and interior surfaces are painted galvanized steel.

3 >. Floor

The floor is made of hot-rolled steel, covered with 16 mm thick viva board and covered with marble-patterned plastic floorboard.

4 >. Door

The door is made of aluminum, the upper half is glass, size 0.90 x 1.90 m. The frame is aluminum. There are knobs and keys to lock both outside and inside.

5 >. Window

The window is a double pane of glass that can be moved left-right, size 1.00 x 1.80 m., with an aluminum frame.There is a lock inside.

Electrical System

LED lamp 2x36 watt with on-off switch, double light rail
Ventilation fan Size 8 inch
Breaker 32 amp
Waterproof external power socket (Power Plug)
2 electrical plug
Switch On-off

Knowledge

PU Foam(Polyurethane Foam)

Flame retardant UL 94 HBF	Low thermal conductivity	Temperature resistant
PU insulation has flame retardant properties. Fire Safety UL 94 Flame Class HBF Rating. When exposed to flame, it will not ignite. and stop the spread of fire when there is no fuel	PU foam has a thermal conductivity (Thermal Conductivity (K) as low as 0.023 W/m.K, ensuring very little heat from the outside entering the inside). And the cold inside the room goes out of the room very little as well.	PU foam can withstand temperatures in the range of -60 to 100 degrees Celsius, can be used in a wide range of industrial applications covering all requirements.
Anti bacterial	Insulated closed cell system	Strong joint system
Contains Microban® antibacterial agent, which is effective against bacteria. Can inhibit the growth of bacteria that cause odor, stains, food poisoning. Its antibacterial properties are maintained throughout its lifespan.	Closed Cell System insulation prevents transmission and formation of moisture. low water retention rate and an insulating density of 2.50 lb/ft³, making it high strength, difficult to break, and can be produced at extra lengths.	PU insulation uses the production of joints with an Eccentric Lock system by locking between the wall panels with a key along the length of the wall. make high strength At the joint of the sheet, there is a rubber seal (Gasket Tongue) to ensure that the joint of the sheet is completely sealed. The air cannot flow through it.

PS Foam(Polystyrene Foam)

Low price	Low thermal conductivity	Temperature resistant
PS insulation is less expensive than PIR and PU insulation, making it suitable for a wide range of applications such as large warehouses, cleanrooms, and fabrication rooms that do not require very low temperatures. Helps to invest less in the beginning	PU foam has a thermal conductivity (Thermal Conductivity (K) as low as 0.031 W/m.K, ensuring very little heat from the outside entering the inside). And the cold inside the room goes out of the room very little as well.	PS foam can withstand temperatures in the range of -50 to 85°C and can be used in a wide range of industrial applications covering all requirements
Anti bacterial	Light weight	Versatile application
Contains Microban® antibacterial agent, which is effective against bacteria. Can inhibit the growth of bacteria that cause odor, stains, food poisoning. Its antibacterial properties are maintained throughout its lifespan.	PS foam weighs less than other types of insulation. commonly used in cold rooms Make the foundation structure of the building to bear less weight. saves construction budget and suitable for mobile office and mobile residence because of light weight easy to move	PS sheet can be applied and adapted for many applications such as cold storage, restaurant, warehouse building, office, industrial plant. Mobile shelters, clean rooms, dairy farms, animal farms, baking rooms, factory walls. Supermarkets, field offices, etc.